Elite Portable Horse Stall Front



Front Only – Available in 9′ or 12′


  • 9 feet length x 7 feet height x 1 inch width
  • 14-gauge galvanized steel
  • Powder coated gold paint finish
  • Yoke is one piece of steel tube – no additional corner welds or sharp edges.
  • Bars are evenly spaced 2 inches apart
  • Bars are fully welded inside frame
  • Pins available to connect sides (2-prong $25, 3-prong $30, 4-prong $35)


  • Horse Stall Fronts = 110lbs


  • Open rounded yoke door
  • Swinging door (on hinges) which is centered
  • Stall door is 4 feet wide
  • Stall door hinges are fully welded and require no additional assembly
  • Stall door latch is fully welded to the frame
  • Stall door can be locked with a standard double end snap
  • Additional pin lock on the bottom of the door


  • 1400gsm vinyl coated nylon webbing
  • 2 pieces of vinyl – outside and inside the horse stall
  • 2-inch-thick nylon sewn onto the edges and screwed into the steel frame
  • Round head screws and washers every 8 inches
  • 5 layers of industrial strength foam between the vinyl
  • Comes standard with Hunter Green vinyl
    • Orders of 50+ stalls – Available in Tan, Royal Blue, or Hunter Green


Be the first to see specials
& Read Our Articles

Horse stall mats defects second quality seconds

We Can’t Believe These Prices Either!!!