Bale Elevator Transport Kit with Hitch
August 19, 2021
16′ Hay Elevator Base Unit
August 23, 2021
Bale Chute for Hay Elevators
$299.99
This chute hinges to your elevator. It tips back against the wagon or truck for easy unloading. Long tapered design automatically lines up each bale to prevent them from tipping or turning while being pushed up elevator. The grate allows loose material to fall through for a smoother operation. Although it’s not required it really lends a helping hand, especially on a long hot day.
In stock
This chute hinges to your elevator. It tips back against the wagon or truck for easy unloading. Long tapered design automatically lines up each bale to prevent them from tipping or turning while being pushed up elevator. The grate allows loose material to fall through for a smoother operation. Although it’s not required it really lends a helping hand, especially on a long hot day.
Make life even easier by adding a bale chute to your elevator. This 6′ chute allows the bale to align itself with the elevator. Simply lay it against the wagon or vehicle you are unloading, place the bales onto the chute, the chain will catch and pull them along. The openness of the chute allows for any chaff to fall through.
- A must have if moving hay is a real chore
- An extra set of guiding hands to get the bales on
- Perfect companion for heavy bales or weak workers
Related products
-
BHT-2 Advanced Baler Mounted Tester
$369.99Features
- Bale type: small square and round
- Multi-sensor technology takes readings from the left, right and middle of the bale for greater overall accuracy
- Average of readings updated and displayed every 3 seconds
- Large, illuminated LCD display and keypad for easy viewing during day or night
- ± Moisture offset adjustments
- Adjustable high/ low limit of moisture reading
- Firmware/calibration curves upgradable via standard USB
-
16′ Hay Elevator Base Unit
$1,499.99The basic unit comes in two 8′ pieces that easily go together. The 16′ unit needs a half horse power motor (sold separately). From there you can add 4′ or 8′ sections to make the conveyor as long as you need. Once you get to 24 feet in length you’ll want to increase your motor to a 3/4 horse which we also offer (sold separately).
