HT-PRO Hay Probe 20″
December 18, 2015
Guardian Pellet Bedding
December 18, 2015
BHT-2 Advanced Baler Mounted Tester
$369.99
Features
- Bale type: small square and round
- Multi-sensor technology takes readings from the left, right and middle of the bale for greater overall accuracy
- Average of readings updated and displayed every 3 seconds
- Large, illuminated LCD display and keypad for easy viewing during day or night
- ± Moisture offset adjustments
- Adjustable high/ low limit of moisture reading
- Firmware/calibration curves upgradable via standard USB
In stock
You may also like…
-
HT-PRO Hay Probe 20″
$239.99Features
- 20″ probe lengths available
- Includes calibration clip – less than 20 seconds to calibrate
- Above and below moisture limit indication
- Illuminated LCD display
Features
- Bale type: small square and round
- Multi-sensor technology takes readings from the left, right and middle of the bale for greater overall accuracy
- Average of readings updated and displayed every 3 seconds
- Large, illuminated LCD display and keypad for easy viewing during day or night
- ± Moisture offset adjustments
- Adjustable high/ low limit of moisture reading
- Firmware/calibration curves upgradable via standard USB
Take the guess work out of hay baling! The BHT-2 Advanced Baler Mounter Hay Moisture Tester is recommended for small square, large square, and round bales. All makes and models of balers will work with this moisture tester. We have been using this product for over five years in all of our balers and it has performed excellent in all conditions. As well as, increased our quality of hay bales or round bales.
Specifications
- Moisture range: 8% to 40% depending on baler type use
- Accurate throughout the normal range of stored hay
- Display resolution: 0.1% moisture
- 12 volt power source
- LED backlight
- Snap together plug in for easy connection from tractor to baler
- Auto shut off after 20 minutes of idle time
Includes
- Easy to read display module
- 10 ft. fused power cable
- Two moisture sensor pads
- Two 35 ft. shielded sensor cables
- Twelve sensor cable ties
- Mounting Hardware
- One USB Cable for updates
- Complete installation instructions
- High moisture alarm
- Low moisture alarm
- Offset features allows you to change moisture reading to adjust for using Hayguard as a preservative as your hay baling needs
You can contact us at 740.363.6073 with any questions and please watch our video on hay production on the “Hay Baling Supplies” main page.
You may also like…
-
HT-PRO Hay Probe 20″
$239.99Features
- 20″ probe lengths available
- Includes calibration clip – less than 20 seconds to calibrate
- Above and below moisture limit indication
- Illuminated LCD display
Related products
-
16′ Hay Elevator Base Unit
$1,499.99The basic unit comes in two 8′ pieces that easily go together. The 16′ unit needs a half horse power motor (sold separately). From there you can add 4′ or 8′ sections to make the conveyor as long as you need. Once you get to 24 feet in length you’ll want to increase your motor to a 3/4 horse which we also offer (sold separately).
-
Open Sweep System 180 x 20
$5,799.99180X 20 Open Sweep System Fully reversible, this full function 180° sweep with adjustable 20′ ally will make life easier and safer. This really allows the herd to start moving […]
-
10’ Red Tarter Grain Feeder
$319.9910’ red tarter grain feeder
-
- This 10’ red bunk feeder is the ideal low-sitting feeder for your cattle and livestock animals. Standing at 21” tall and weighing in at 110 lbs, this bunk is one of our heavier feeders available. Whether for use in a small or large herd, this bunk feeder is the perfect addition to your farm and is sure to last you several years to come.
- 110 lbs
- E-coat red finish
- 10’ long, 28” wide, 21” tall
- Holes for water drainage in bottom
- This 10’ red bunk feeder is the ideal low-sitting feeder for your cattle and livestock animals. Standing at 21” tall and weighing in at 110 lbs, this bunk is one of our heavier feeders available. Whether for use in a small or large herd, this bunk feeder is the perfect addition to your farm and is sure to last you several years to come.
-
-
Cattlemaster Series 3
$2,799.99Looking for a squeeze chute to handle up to 1200 pounds? This chute is available with an automatic or manual headgate and can even be added to our sweep systems or palpation cage. This is a regular stocking item for us, please call for availability.
